eBay Classifieds » All ads » For sale » 

lathe in Allentown

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: 3.150" Tailstock Taper: 5 MT Tailstock Travel: 7" Machine Weight: 6,200 LBS -EQUIPPED WITH- 14 Inch, 4 Jaw ...

  2. 1996 Citizen CINCOM M20 (CNC Swiss Type Lathe)

    1996 Citizen CINCOM M20 CNC Swiss Type Lathe CNC Control: Mitsubishi Meldas 530LHC Max. Machining Diameter: .787" (20mm) Max. Machining Length per Chucking: 12.6" Main Spindle Indexing: Full "C" Axis Sub Spindle Indexing: 15 degree Spindle Speeds (Main Spindle Drive): 200 - 8100 rpm Spindle Speeds (Back Spindle): 180 - 7200 rpm Rotary Tool Spindle (Gang Plate): 250 - 5000 rpm ...

  3. 1970 Bullard DYNATROL 76 (Vertical Turret Lathe)

    1970 Bullard DYNATROL 76 Vertical Turret Lathe Table Size: 76" 4-Jaw Maximum Swing: 88" Maximum Height Under Ram: 72" Cross Rail Travel Vertical: 62" Maximum Height Under Rail: 60" Ram Travel Vertical: 36" Ram Travel Horizontal: 48-1/2" Minimum Hole Size Ram Will Go In: 9-1/2" Side Head Travel Vertical 72" Side Head Travel In & Out: 40" Table Speed: 4 To 150 RPM Feeds Fine: .002 To .100 IPM ...

  4. 1954 Bullard CUTMASTER 56 (Vertical Turret Lathe)

    1954 Bullard CUTMASTER 56 Vertical Turret Lathe 56 Inch 4-Jaw Chuck 5-Staion Turret Side Cutting Head Ram More Info: http://www.2spade.com/1954BullardCUTMASTER56.html

  5. 1956 Bullard CUTMASTER 46 (Vertical Turret Lathe)

    1956 Bullard CUTMASTER 46 Vertical Turret Lathe 46 Inch 4-Jaw Chuck 5-Staion Turret Side Cutting Head More Info: http://2spade.com/1956BullardCUTMASTER46.html

  6. 1943 Bullard SPIRAL DRIVE 36 (Manual Vertical Turret Lathe)

    1943 Bullard SPIRAL DRIVE 36 Manual Vertical Turret Lathe Table Size: 36" 4 Jaw Height Under Rail: 26" Table Speed 10 To 200 Rpm Feeds: .002 To .500 I.P.R. Main Motor: 20 HP Turret Head Travel Left To Right 21" Turret Ram Head Turret Travel Up & Down: 27" Turret Head Position: 5 Turret Head Swivel: Yes More Info: http://2spade.com/1943BullardSPIRALDRIVE36.html

  7. Cincinnati HYDROSHIFT 19X54 (Manual Engine Lathe)

    Cincinnati HYDROSHIFT 19X54 Manual Engine Lathe Swing Over Ways: 19" Swing Over Cross Slide: 11.5" Distance Between Centers: 54" Spindle Hole: 1.750" Spindle Taper: L-1 Spindle Speeds (12): 15-1,470 RPM Cross Slide Travle: 12" Top Slide Travel: 3.250" Bed Size: 13.875"W x 10.875"D Tailstock Taper: MT4 Tailstock Travel: 5" -EQUIPPED WITH- Taper Attachment ...

  8. 1953 Jones & Lamson 7A (Manual Turret Lathe)

    1953 Jones & Lamson 7A Manual Turret Lathe Swing Over Bed: 21" Swing Over Cross Slide: 13" Max Turning Length: 37" Spindle Bore: 3" Bar Capacity: 2.5" Spindle Nose: A1-8 Spindle Speed: 1,500 RPM Number of Turret Stations: 6 More Info: http://2spade.com/1953Jones&Lamson7A.html

  9. 1978 Lodge & Shipley 3220 WHD POWER TURN (Oil Country Engine Lathe)

    1978 Lodge & Shipley 3220 WHD POWER TURN Oil Country Type Engine Lathe Swing Over Bed: 32" Distance Between Centers: 200" Spindle Bore: 12.5" Spindle Motor: 50 HP -EQUIPPED WITH- Double Chuck System Eurotherm DC Drive Taper Attachment Newall DRO ***Lathe Rebuilt in 1998*** More Info: http://2spade.com/1978Lodge&Shipley3220WHDPOWERTURN.html

  10. 1981 Leblond 24" REGAL 9" HOLLOW SPINDLE (Oil Country Engine Lathe)

    1981 Leblond 24" REGAL 9" HOLLOW SPINDLE Oil Country Type Engine Lathe Swing Over Bed: 24" Distance Between Centers: 135" Spindle Bore: 9" Spindle Motor: 20 HP Chuck(s) Diameter: 24" -EQUIPPED WITH- Double Chuck on Headstock Taper Attachment Newall DRO ***Rebuilt in 2000*** More Info: http://2spade.com/1981Leblond24REGAL9HOLLOWSPINDLE.html

  11. King 62VBM (Vertical Turret Lathe)

    King 62VBM Vertical Turret Lathe Table Size: 62" Maximum Swing: 70" Height Under Rail: 52" Table Speeds: 0-120 RPM Main Motor: 40 HP Boring Head Travel: 52: Boring Head Tilt: 60 DEG Turret Head Travel: 45" Turret Head Tilt: 30 DEG -EQUIPPED WITH- 5-Position Turret (1) Ram Head (1) Side Head 62" 4-Jaw Chuck w/Jaws Trak 2-Axis DRO Table Guards Hyd Trace More Info: http://2spade.com ...

  12. 1954 King 42VBM (Vertical Turret Lathe)

    1954 King 42VBM Vertical Turret Lathe Table Size: 42" Maximum Swing: 48" Height Under Rail: 37" Table Speed Range: 2.9 - 200 RPM Table Motor: 30 HP -EQUIPPED WITH- 5-Position Turret (1) Ram Head (1) Side Head 42" 4-Jaw Chuck w/Jaws Pendent Control More Info: http://2spade.com/1954King42VBM.html

  13. 1997 POREBA GAB BED HOLLOW SPINDLE ENGINE LATHE * NICE!

    POREBA GAB BED HOLLOW SPINDLE ENGINE LATHE Model -TRP-93D 320mm x 3M ***FRONT & REAR CHUCKS*** SPECIFICATIONS: Maximum Swing Over Bed ways 36.6" Maximum Swing Over Carriage 24.8" Maximum Swing In Gap 45.2" Spindle Hole 12.59" Distance Between Centers 118" Spindle Speeds ...

  14. 26"/52" X 48"/84" LEBLOND REGAL HEAVY DUTY SLIDING GAP BED LATHE

    26"/52" X 48"/84" LEBLOND REGAL HEAVY DUTY SLIDING GAP BED LATHE MODEL 24" NEW 1967 ***VERY RARE LATHE IN VERY NICE CONDITION!*** SPECIFICATIONS: SWING OVER BED ------------ ( CLOSED ) ---- 26" SWING OVER BED ------------ ( OPEN ) ------ 52" SWING OVER COMPOUND ----------------------- 18" DISTANCE BETWEEN CENTERS --- ( CLOSED ) --- 48" DISTANCE BETWEEN CENTERS --- ( OPEN ) -- ...

  15. Warner & Swasey 2A Turret Lathe * Nice Shape * Boring Tooling!

    Warner & Swasey 2A Turret Lathe Specifications: Swing over Bed 20” Swing over Cross Slide 18” Bar Capacity 4 1/2” Chuck Size 15” Hole Thru Spindle 3 3/4” Hexagon Turret: End of Spindle to Turret Face, Max. 51 1/2” Max. Length Turned 36 1/4” Longitudinal Feed .004-.149 Cross Slide Cross Slides: Longitudinal 43 1/4” Cross Travel 14 1/4” Longitudinal Feed .004-1.19 Cross Feed ...

  16. 34” x 100” BROADBENT Oil County Lathe with 16-1/4” Hole thru the Spind

    34” x 100” BROADBENT Oil County Lathe with 16-1/4” Hole thru the Spindle and Automatic Threading. New 1980 SPECIFICATIONS: 34” Swing Over Bed ways 20” Swing Over Cross Slide 56” Swing In Removable Gap 16.25” Spindle thru Hole Spindle Speeds from 4 to 350 RPM Inch / Metric Threading Air Kick out for Threading EQUIPPED WITH: 30” Diameter Front Mounted 4-Jaw Chuck Taper Turning Attachment 2 ...

  17. 1996 IKEGAI CNC LATHE * NICE CONDITION * CLEAN & TIGHT!

    1996 IKEGAI TU-15 TWO-AXIS CNC TURNING CENTER ***VIDEO AVAILABLE*** SPECIFICATIONS: MAX. SWING ........................... 17-3/4" MAX. SWING OVER CARRIAGE ............. 14" MAX. TURNING LENGTH .................. 14-9/16" MAX. BAR WORK DIA. ................... 2" SPINDLE NOSE ......................... A2-6 SPINDLE SPEEDS ....................... 40-4000 RPM SPINDLE DRIVE MOTOR .............. ...

  18. 1968 Binns & Berry TB 12.5 (Engine Lathe)

    1968 Binns & Berry TB 12.5 Manual Engine Lathe Serial Number: 9385 Swing Over Ways: 25" Swing Over Cross: 21" Distance Between Centers: 252" Spindle Bore: 4" -EQUIPPED WITH- Taper Attachment Steady Rests More Info: http://2spade.com/1968Binns&BerryTB125.html

  19. 1941 American 24X240 (Manual Engine Lathe)

    1941 American 24X240 Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 240" Spindle Bore: 2" Spindle Motor: 25 HP Spindle Speed: 11-450 RPM -EQUIPPED WITH- 4-Jaw Chuck Steady Rest More Info: http://2spade.com/1941American24X240.html

  20. Ex-Cell-O X-1100 (CNC Vertical Turret Lathe)

    Ex-Cell-O X-1100 CNC Vertical Turret Lathe Control: Fagor 8055 Table (Chuck) Diameter: 30" Swing: 42" Table Motor: 100 HP Max. Workpiece Height: 28" Number of Turret Stations: 6 Tools Tool Holder Taper: ISO-50 Machine Dimensions: 134"L x 100"W x 136"H -EQUIPPED WITH- Air Conditioner for Electrical Cabinet Full C-Axis Thru Spindle Coolant (live tools) Spindle ...

  21. 1942 Axelson A 32 (Manual Engine Lathe)

    1942 Axelson A 32 Manual Engine Lathe Max Swing Over Bed: 32.5" Distance Between Centers: 432" Bed Length: 504" Spindle Motor: 25 HP -EQUIPPED WITH- 28" Chuck 4 Steady Rests Tailstock More Info: http://2spade.com/1942AxelsonA32.html

  22. 1951 Bullard CUTMASTER 42 (Vertical Turret Lathe)

    1951 Bullard CUTMASTER 42 Vertical Turret Lathe Table Diameter: 42" Max Swing With Side Head Down: 54" Max Swing With Side Head Up: 45" Vertical Travel of Turret: 30-3/8" Vertical Travel of Side Head: 37-1/4" Max Height Under Rail: 37" Max Height Under Turret Head: 48-1/4" Table Motor: 30 HP Table Speeds: 4 - 150 RPM -EQUIPPED WITH- Side Head 5 Station Tool Turret Tracers (on ...

  23. IKEGAI DA-25 GEARED HEAD GAP BED ENGINE LATHE

    IKEGAI DA-25 GEARED HEAD GAP BED ENGINE LATHE Brand: IKEGAI Model: DA-25 Type: Gap Lathes Year: 1966 Location: Ohio Description: 15'' 3 JAW CHUCK, 2 1/4'' BORE 24'' X 80'' CC 24" Swing In Gap Price: $8500.00 F.O.B. OH IN GOOD RUNNING CONDITION!

  24. 1978 Hardinge Lathe Super Precision HLV-H-EM Inch/Metric Threading

    1978 Hardinge Lathe Super Precision HLV-H-EM Inch/Metric Threading Technical Specifications: •Spindle capacities: • Round 5C collets: 1-1/16" • Hexagon 5C collets; 7/8" • Square 5C collets: 3/4" • Step chucks: 1-1/16" to 6" • 5" 3 Jaw chuck •Variable spindle speeds: 125 - 3,000 RPM •Swing over bed: 11" •Cross slide: 6" •Carriage: 9" •Distance between centers: 18" •Hole through spindle: 1.25 ...

Be the first to get new results like these -