eBay Classifieds » All ads » For sale » Business & industrial » 

lathe in Allentown

(0 ad found)

Categories
Price [clear]
$ to

Sorry, but no ads matched your search for "lathe" in your area.

Be the first to get new results like these -

Can't find what you are looking for in your area? See more ads from nearby cities.

  1. 1998 Clausing Metosa EL2087CS (CNC Engine Lathe)

    1998 Clausing Metosa EL2087CS CNC Engine Lathe Control: Fagor 800T Swing Over Bed: 20.875" Swing In Gap: 30.75" Swing Over Cross Slide: 12.75" Distance Between Centers: 87" Spindle Nose: D1-8 Spindle Speeds: 0-1,700 RPM Spindle Motor: 10 HP Spindle Bore: 3.150" Tailstock Taper: 5 MT Tailstock Travel: 7" Machine Weight: 6,200 LBS -EQUIPPED WITH- 14 Inch, 4 Jaw ...

  2. 1996 Citizen CINCOM M20 (CNC Swiss Type Lathe)

    1996 Citizen CINCOM M20 CNC Swiss Type Lathe CNC Control: Mitsubishi Meldas 530LHC Max. Machining Diameter: .787" (20mm) Max. Machining Length per Chucking: 12.6" Main Spindle Indexing: Full "C" Axis Sub Spindle Indexing: 15 degree Spindle Speeds (Main Spindle Drive): 200 - 8100 rpm Spindle Speeds (Back Spindle): 180 - 7200 rpm Rotary Tool Spindle (Gang Plate): 250 - 5000 rpm ...

  3. 1970 Bullard DYNATROL 76 (Vertical Turret Lathe)

    1970 Bullard DYNATROL 76 Vertical Turret Lathe Table Size: 76" 4-Jaw Maximum Swing: 88" Maximum Height Under Ram: 72" Cross Rail Travel Vertical: 62" Maximum Height Under Rail: 60" Ram Travel Vertical: 36" Ram Travel Horizontal: 48-1/2" Minimum Hole Size Ram Will Go In: 9-1/2" Side Head Travel Vertical 72" Side Head Travel In & Out: 40" Table Speed: 4 To 150 RPM Feeds Fine: .002 To .100 IPM ...

  4. 41" x 78" Geminis Model GE-1000S Oil Country Engine Lathe

    41" x 78" Geminis Model GE-1000S Oil Country Engine Lathe Specifications: Swing Over Bed Ways.................41.73" Swing In Gap........................51.22" Swing Over Cross Slide..............28.36" Length of Gap.......................6.69" Distance Between Centers............78" Spindle Bore........................20" Max RPM.............................200 RPM Electrics................ ...

  5. 1943 Bullard SPIRAL DRIVE 36 (Manual Vertical Turret Lathe)

    1943 Bullard SPIRAL DRIVE 36 Manual Vertical Turret Lathe Table Size: 36" 4 Jaw Height Under Rail: 26" Table Speed 10 To 200 Rpm Feeds: .002 To .500 I.P.R. Main Motor: 20 HP Turret Head Travel Left To Right 21" Turret Ram Head Turret Travel Up & Down: 27" Turret Head Position: 5 Turret Head Swivel: Yes More Info: http://2spade.com/1943BullardSPIRALDRIVE36.html

  6. Cincinnati HYDROSHIFT 19X54 (Manual Engine Lathe)

    Cincinnati HYDROSHIFT 19X54 Manual Engine Lathe Swing Over Ways: 19" Swing Over Cross Slide: 11.5" Distance Between Centers: 54" Spindle Hole: 1.750" Spindle Taper: L-1 Spindle Speeds (12): 15-1,470 RPM Cross Slide Travle: 12" Top Slide Travel: 3.250" Bed Size: 13.875"W x 10.875"D Tailstock Taper: MT4 Tailstock Travel: 5" -EQUIPPED WITH- Taper Attachment ...

  7. 1953 Jones & Lamson 7A (Manual Turret Lathe)

    1953 Jones & Lamson 7A Manual Turret Lathe Swing Over Bed: 21" Swing Over Cross Slide: 13" Max Turning Length: 37" Spindle Bore: 3" Bar Capacity: 2.5" Spindle Nose: A1-8 Spindle Speed: 1,500 RPM Number of Turret Stations: 6 More Info: http://2spade.com/1953Jones&Lamson7A.html

  8. 1981 Leblond 24" REGAL 9" HOLLOW SPINDLE (Oil Country Engine Lathe)

    1981 Leblond 24" REGAL 9" HOLLOW SPINDLE Oil Country Type Engine Lathe Swing Over Bed: 24" Distance Between Centers: 135" Spindle Bore: 9" Spindle Motor: 20 HP Chuck(s) Diameter: 24" -EQUIPPED WITH- Double Chuck on Headstock Taper Attachment Newall DRO ***Rebuilt in 2000*** More Info: http://2spade.com/1981Leblond24REGAL9HOLLOWSPINDLE.html

  9. 1978 Lodge & Shipley 3220 WHD POWER TURN (Oil Country Engine Lathe)

    1978 Lodge & Shipley 3220 WHD POWER TURN Oil Country Type Engine Lathe Swing Over Bed: 32" Distance Between Centers: 200" Spindle Bore: 12.5" Spindle Motor: 50 HP -EQUIPPED WITH- Double Chuck System Eurotherm DC Drive Taper Attachment Newall DRO ***Lathe Rebuilt in 1998*** More Info: http://2spade.com/1978Lodge&Shipley3220WHDPOWERTURN.html

  10. King 62VBM (Vertical Turret Lathe)

    King 62VBM Vertical Turret Lathe Table Size: 62" Maximum Swing: 70" Height Under Rail: 52" Table Speeds: 0-120 RPM Main Motor: 40 HP Boring Head Travel: 52: Boring Head Tilt: 60 DEG Turret Head Travel: 45" Turret Head Tilt: 30 DEG -EQUIPPED WITH- 5-Position Turret (1) Ram Head (1) Side Head 62" 4-Jaw Chuck w/Jaws Trak 2-Axis DRO Table Guards Hyd Trace More Info: http://2spade.com ...

  11. 1954 King 42VBM (Vertical Turret Lathe)

    1954 King 42VBM Vertical Turret Lathe Table Size: 42" Maximum Swing: 48" Height Under Rail: 37" Table Speed Range: 2.9 - 200 RPM Table Motor: 30 HP -EQUIPPED WITH- 5-Position Turret (1) Ram Head (1) Side Head 42" 4-Jaw Chuck w/Jaws Pendent Control More Info: http://2spade.com/1954King42VBM.html

  12. 2008 Ganesh GT-44160 (Manual Engine Lathe)

    2008 Ganesh GT-44160 Manual Engine Lathe Swing Over Bed: 44" Swing Over Cross Slide: 32" Swing Thru Gap: 61" Width of Gap: 19.49" Distance Between Centers: 160" Bed Width: 24" Spindle Motor: 20 HP Spindle Speeds: 4-420 RPM Spindle Bore: 6" Spindle Nose: A2-11 Carriage Cross Slide Travel: 23.6" Carriage Width: 31.5" -EQUIPPED WITH- 6” Spindle Bore Inch/Metric Threading 40” 4-Jaw Chuck ...

  13. 1951 Axelson 32-120 (Manual Engine Lathe)

    1951 Axelson 32-120 Manual Engine Lathe Thru Hole: 2.5" Swing Over Bedways: 60" Center Distance: 120" Spindle Speeds: 5 - 467 RPM Spindle Motor: 26 HP -EQUIPPED WITH- Raised Head & Tailstock 30" Chuck More Info: http://2spade.com/1951Axelson32120.html

  14. Hardinge Model HLV-H Precision Toolroom Lathe * DRO * Tooling * Nice!

    Hardinge Model HLV-H Precision Tool-room Lathe SPECIFICATIONS: Swing Over Bed: 11" Swing Over Carriage: 9" Swing Over Cross Slide: 6" Distance Between Centers: 18" Spindle Speeds (Variable): 125- 3,000 RPM Spindle Nose: 4 Degrees Taper Hole Thru Spindle: 1-1/4" Threads: 11- 108 TPI Feeds (Variable): 1/4- 7 IPM Tailstock Quill Travel: 3-3/4" Tailstock Quill Taper: #2MT Horsepower: 1-1/2 H.P. ...

  15. 1968 Binns & Berry TB 12.5 (Engine Lathe)

    1968 Binns & Berry TB 12.5 Manual Engine Lathe Serial Number: 9385 Swing Over Ways: 25" Swing Over Cross: 21" Distance Between Centers: 252" Spindle Bore: 4" -EQUIPPED WITH- Taper Attachment Steady Rests More Info: http://2spade.com/1968Binns&BerryTB125.html

  16. 1941 American 24X240 (Manual Engine Lathe)

    1941 American 24X240 Manual Engine Lathe Swing Over Bed: 24" Distance Between Centers: 240" Spindle Bore: 2" Spindle Motor: 25 HP Spindle Speed: 11-450 RPM -EQUIPPED WITH- 4-Jaw Chuck Steady Rest More Info: http://2spade.com/1941American24X240.html

  17. Ex-Cell-O X-1100 (CNC Vertical Turret Lathe)

    Ex-Cell-O X-1100 CNC Vertical Turret Lathe Control: Fagor 8055 Table (Chuck) Diameter: 30" Swing: 42" Table Motor: 100 HP Max. Workpiece Height: 28" Number of Turret Stations: 6 Tools Tool Holder Taper: ISO-50 Machine Dimensions: 134"L x 100"W x 136"H -EQUIPPED WITH- Air Conditioner for Electrical Cabinet Full C-Axis Thru Spindle Coolant (live tools) Spindle ...

  18. 1942 Axelson A 32 (Manual Engine Lathe)

    1942 Axelson A 32 Manual Engine Lathe Max Swing Over Bed: 32.5" Distance Between Centers: 432" Bed Length: 504" Spindle Motor: 25 HP -EQUIPPED WITH- 28" Chuck 4 Steady Rests Tailstock More Info: http://2spade.com/1942AxelsonA32.html

  19. 1951 Bullard CUTMASTER 42 (Vertical Turret Lathe)

    1951 Bullard CUTMASTER 42 Vertical Turret Lathe Table Diameter: 42" Max Swing With Side Head Down: 54" Max Swing With Side Head Up: 45" Vertical Travel of Turret: 30-3/8" Vertical Travel of Side Head: 37-1/4" Max Height Under Rail: 37" Max Height Under Turret Head: 48-1/4" Table Motor: 30 HP Table Speeds: 4 - 150 RPM -EQUIPPED WITH- Side Head 5 Station Tool Turret Tracers (on ...

  20. 50" X 20' GEMINIS MODEL GE-1200S GAP BED ENGINE LATHE

    50" X 20' GEMINIS MODEL GE-1200S GAP BED ENGINE LATHE SPECIFICATIONS: SWING OVER BED ................... 49-1/2" DISTANCE BETWEEN CENTERS ......... 240" (20') SWING OVER CROSS SLIDE ........... 34-1/4" SWING IN GAP ..................... 63" SPINDLE SPEEDS ................... (24) 2.8 TO 560 RPM SPINDLE HOLE ..................... 4" THREADING (ENGLISH) .............. (54) 1/2 TO 30 TPI ...

  21. 1995 HAAS HL-2 CNC LATHE WITH LOW HOURS!

    1995 HAAS HL-2 CNC LATHE WITH LOW HOURS! ***VIDEO AVAILABLE*** SPECIFICATIONS: Swing Over Front Apron: 20" Swing Over Cross Slide: 9.5" Chuck Size: 8" Chuck: Kitagawa B208 Max Bar Capacity: 2" Distance Between Centers: 24" Max Cutting Diameter: 10" Max Cutting Length: 20" Spindle Speed: 3,750 RPM Spindle Motor: 15/20 HP Spindle Bore: 3" Draw Tube Bore: 2.06" X-Axis Travel: 8.45" Z-Axis ...

  22. 2005 Millport Model SMART-LATHE Z1740 17" x 40" Tool Room CNC Lathe

    2005 Millport Model SMART-LATHE Z1740 17" x 40" Tool Room CNC Lathe With "TEACH-IN" Capability (First Part Program Copy) SPECIFICATIONS: Swing Over Bed: 17" Dist. Between Centers: 40" Swing Over Gap: 26" Spindle Hole Through: 3 3/8" Bar Capacity: 3.25" Spindle Nose: ...

  23. 2002 KINGSTON HD2660 GEARED HEAD GAP BED ENGINE LATHE * NICE!

    ***WAYS ARE EXCELLENT!*** CATALOGUE SPECIFICATIONS: Swing over the bed................................. 26" Swing over the cross slide......................... 17-1/2" Swing in the Gap................................... 35-1/8" Distance between centers........................... 60" Cross Slide Travel................................. 15-3/4" Spindle Nose...................................... ...

  24. 1998 MAZAK M-5N CNC Flat Bed Lathe * ONLY $35K!!!***

    1998 MAZAK M-5N CNC Flat Bed Lathe Specifications: Swing Over Bed: ...................................................24" Swing Over Carriage:.............................................13" Distance Between Centers:....................................81.9" Maximum Turning Diameter:..................................13.75" Travels – X-Axis: ................................................... ...

Be the first to get new results like these -